Scout Library

Rolling hitch


Page Post Date : 2016-01-21 Page Post User : Ramkumar Category : Hitches - Dwithiya Sopan Edit / Suggest about this post

The rolling hitch is a knot (see also Magnus hitch) used to attach a rope to a rod, pole, or another rope. A simple friction hitch, it is used for lengthwise pull along an object rather than at right angles. The rolling hitch is designed to resist lengthwise movement for only a single direction of pull.

A common usage while sailing is for rigging a stopper to relax the tension on a sheet so that a jammed winch or block can be cleared.

  1. Begin by making a turn around the object, bringing the working end back between the object and the standing part. Cross over the standing part away from the desired direction of pull.
  2. Make a second turn that exactly follows the first, and hence also passes between the object and standing part and then crosses over the standing part, away from the direction of pull. Make sure the second turn "tucks" between the first turn and the standing part; that is what gives this version extra grip when made around another rope
  3. Finish with a half hitch, moving around the object in the same direction as the first turns, as for a clove hitch.
  4. Dress by snugging the hitch around the object before applying load.